¶ Step 1: Removing Z-Axis Parts
This step requires the removal of existing parts on the Z-Axis Stepper-Motor
| Image | Instructions |
|---|---|
 |
|
 |
|
¶ Step 2: Touch Probe Mount
| Image | Instructions |
|---|---|
 |
|
¶ Step 3: Assembling Components
| Image | Instructions |
|---|---|
 |
|
 |
|
¶ Step 4: Wire
The connector on the wire is keyed, so there is only one way which it can plug in.
| Image | Instructions |
|---|---|
 |
|
 |
|
 |
|
¶ Step 5: Enable
| Image | Instructions |
|---|---|
 |
|
¶ Step 6: Testing
If your touch probe does not work after doing the below, verify your wiring. Otherwise Contact Us.
| Image | Instructions |
|---|---|
 |
|
 |
|
 |
|
¶ Step 7: Corner Probing
| Image | Instructions |
|---|---|
 |
|
 |
|
¶ Step 8: Z Probing
Follow the Steps below to Probe the Z-Axis Only.
| Image | Instructions |
|---|---|
 |
|
 |
|
 |
|