Order Online: www.ooznest.co.uk
![]()
| Attribute | Value |
|---|---|
| SKU | MCC |
| Brand | Ooznest |
| Stock Type | New |
| Weight (g) | 264.00 |
| Control Software | Ooznest Control |
| Voltage Rating (V) | 24 |
| Processor | ESP32 S3 |
| Firmware | grblHAL |
| Connectivity | Ethernet (via Ethernet Module), USB-C, Wifi (Integrated) |
| Stepper Driver Outputs | 4 |
| Stepper Driver Model | TB67S109 |
| Stepper Driver Rating (A) | 2.8 Peak |
| Inputs/Outputs | 1 x Addressable RGB Output, 1 x Coolant/AUX Output, 1 x Door Input, 1 x Emergency Stop Input, 2 x Probe Inputs, 4 x Limit Switch Inputs |
| Expansion Interfaces | 1 x 16-Pin Expansion Header, 1 x I2C, 1 x RS-485 (Modbus) |
| Spindle & Laser Interfaces | 1 x Analogue 0-10V, 1 x Laser PWM, 1 x Spindle Enable, 1 x Spindle PWM, 1 x VFD, VFD (via RS-485 (Modbus)) |
| Supported Motor Type | Bipolar Stepper Motor |
| Maximum Independent Axes | 4 |
| Qty | Name |
|---|---|
| 1x | Motion Control Core (GRBLHal Controller) |
| Product Range | Information | Products |
|---|---|---|
| Controller Case | Add the dedicated Motion Control Core Case to house the Motion Control Core. | |
| Ethernet | Add the Ethernet Module for a wired network connection. Add the 3m Ethernet cable to connect to your local network or directly to your computer. Add the Ethernet to USB-A Adaptor if your computer needs an Ethernet port. | |
| Connector Pack | Add a connector pack for wiring the Motion Control Core. |