The manual is broken down into sections: Mechanical Assembly, Electronics Assembly, Connecting and Final Assembly & Testing. Connecting is broken into two sub sections - Connect Via Wifi and Connect Via Ethernet. Within each section follow through the guides in numerical order.
Only follow the sub section matching the connectivity of your machine.
For the Ethernet version, you do not need to connect via USB.
¶ 1. Start Here
| Step | Preview | Additional Notes |
|---|---|---|
| 1.1 Introduction |  |
¶ 2. Mechanical Assembly
| Step | Preview | Additional Notes |
|---|---|---|
| 2.1 Wheel Assembly |  |
|
| 2.2 Y-Plate Assembly |  |
|
| 2.3 X-Carriage Assembly |  |
|
| 2.4 X-Gantry Assembly |  |
|
| 2.5 Base Assembly |  |
|
| 2.6 Y-Gantry Assembly |  |
|
| 2.7 Router Mount |  |
¶ 3. Electronics Assembly
| Step | Preview | Additional Notes |
|---|---|---|
| 3.1 Drag Chains |  |
|
| 3.2 Limit Switches |  |
|
| 3.3 Power Supply & Emergency Stop |  |
|
| 3.4 Wire Routing |  |
|
| 3.5 Controller |  |
¶ 4. Connecting
| Step | Preview | Additional Notes |
|---|---|---|
| 4.1 Connecting Via Ethernet |  |
| Step | Preview | Additional Notes |
|---|---|---|
| 4.1 Connecting Via Wifi | |
¶ 5. Final Assembly & Testing
| Step | Preview | Additional Notes |
|---|---|---|
| 5.1 Final Assembly |  |
|
| 5.2 Testing Your WorkBee |  |
|
| 5.3 Spoilerboard |  |
¶ Using Your WorkBee
| Step | Preview | Additional Notes |
|---|---|---|
| 6.2 Safety Instructions |  |
|
| 6.4 WorkBee Control Overview |  |
|
| 6.3 First Project |  |
|
| 6.1 Outside Machine Limits Troubleshooting |  |